If you have two devices on the cable, one must be Master and one must be Slave. The options are 0, 1 and 3. Make sure the pin assignment will match before plugging in. Other names used in this publication may be trademarks and are acknowledged. Jan — Dec Day:

Uploader: Nalabar
Date Added: 12 March 2014
File Size: 11.19 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 30108
Price: Free* [*Free Regsitration Required]

The socket latches are levered upwards and latch on to the edges of the DIMM.

Push the locking lever down and hook it under the latch on the edge of socket. Use the items below m935elu one to set the date and time of the wake-up alarm.

This sets the aydio for Suspend mode in minutes. The documentation of the IDE device will tell you how to configure the device as a Master or Slave device. Press Enter after you have retyped it correctly.

M935dlu v2.0 sound driver

Jan — Dec Day: Press Enter to select the highlighted option. The Master device connects to the end of the cable. The first jack is for stereo Line-In signal. Install your drives and connect power from the system power supply.


To leave the setup utility, press the Escape key. These default values are not very demanding and they should allow your system to function with most kinds of hardware and memory chips.


If you connect a USB 2. When choosing a processor, consider the performance requirements of the system.

PC Chips M935DLU (V2.0) Audio Driver

It shows the bundled software that this mainboard supports. You can install this mainboard in an ATX case. Locate the infrared port IR1 connector on the mainboard. The Setup button runs the software auto-installing program as explained in next section.

As soon as the solution is done, the updated USB drive will be released to our website: Secure the metal bracket of the card to the system chassis with a screw.

Audio Ports Use the three audio ports to connect audio devices. At the next dialog auudio, type in the new password, or just press Enter to disable password protection.

This publication, including all photographs, illustrations and software, is protected under international copyright laws, with all rights reserved. If you have entered a password for the system, use m935dlk item to determine, if the password is required to enter the Setup Utility Setup or required both at startup and to enter the Setup Utility Always. During installation put the mainboard on top of the static-protection packaging it came in with the component side facing up.


Before installing this mainboard, make sure jumper JP2 is under Normal setting.


When you see this message, press the Delete key and the Main menu page of the Setup Utility appears on your monitor. Neither this manual, nor any of the material contained herein, may be reproduced without the express written consent of the manufacturer.

Here is a list of the chipset arrangement audoo their respective features: Leave audik items enabled since all the processors that can be installed on this board have internal L2 cache memory. You must use an ATX power supply in order to use this feature. It can even stop your computer from booting properly.

Insert the CPU into the socket. If you enable this item, your system will check all floppy disk drives at start up. Make sure the pin assignment will match before plugging in.

Other options on the main menu page lead to dialog boxes requiring you to answer Yes or No by hitting the Y or N keys.