A3D is a registered trademark of Aureal Inc. Follow onscreen instructions to install the software program step by step until finished. The Pin-1 corner is at the top of the locking lever when it locked. Neither this manual, nor any of the material contained herein, may be reproduced without the express written consent of the manufacturer. See this chapter for information about locating JP2 and the setting options. It is recommended that you leave this item at the default value. The default PCI setting still lets the onboard display work and allows the use of a second display card installed in a PCI slot.

Uploader: Mezikus
Date Added: 10 September 2016
File Size: 66.25 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 27754
Price: Free* [*Free Regsitration Required]

Mercury KOB KM266 FDSMx AMD K7 (Socket A) Mainboard w/ VIA KM266

Jumper Settings Jumpers are sets of pins connected together with jumper caps. Take some care with this page.

Locate the infrared port SIR1 header on the mainboard. Never connect power to the system during installation; otherwise, it may damage the mainboard. Use these items to set the size and capacity of the floppy diskette drive s installed in the system.

The system will automatically detect the kind of CPU that you have installed and make the appropriate ,m266 to the items on this page.

Old Values Shift F2: Holding down the Page Up key also clears the setup information. When enabled, separate memory banks are set for odd and even addresses, and upcoming byte of memory is accessible while refreshing the current byte. If you press the F3 key, the system will automatically detect and configure the hard disks on the IDE channels. Power Management Setup Page This page sets some of the parameters for system power management operation.


Solvusoft’s close relationship with Microsoft as a Gold Certified Partner enables us to provide best-in-class software solutions that are optimized for performance on Windows operating systems. Press F7 to install the setup utility with a set of high-performance values.

Mercury KOB KM FDSMx User`s manual |

Any incorrect usage may cause unexpected damage to the system. Further, the manufacturer reserves the auddio to revise this publication and to make changes from time to time in the content hereof without obligation of the manufacturer to notify any person of such revision or changes.

Mainboard Installation Chapter 2 Mainboard Installation To install this mainboard in a system, please follow these instructions in this chapter: These default values are quite demanding and your system might not function properly if you are using slower memory chips or other low-performance components.

Remove a slot cover from one of the expansion slots on the system chassis.

Mercury KOB KM266 FDSMx Audio Driver

Press Enter after you have typed in the password. Modify Old Values Shift F2: Jan — Dec Day: Jan — Dec Day: Select Item Shift F2: You can install this mainboard in an ATX case. Installing Support Software 1.


This item enables or disables a power management scheme. Therefore, it might happen under Windows XP that a dialogue box shown as below pop out warning you this software has not passed Windows Km626 testing to verify its compatibility with Windows XP.

On the processor, identify the Pin-1 corner by its beveled edge. Install the device s and connect power from the system power supply. Install Memory Modules This mainboard accommodates two pin 2. The installation program loads and displays the following screen.

Mercury KOB KM FDSMx Manuals

We recommend you set this item to be default value. It shows the bundled software that this mainboard supports. You can force the hard disk to power down in Stand By or Suspend modes, or disable the powerdown. If you have two devices on the cable, one must be Master and one must be Slave. Please check the pin assignment of the cable and the USB header on the mainboard. Load Setup Defaults If you auduo this item, the system starts up more quickly be elimination some of the power on test routines.